27 ARC Efficiency and Protective Coatings ARC S2 Ceramic-Reinforced, Sprayable, Erosion-Resistant Coating An advanced, liquid ceramic reinforced coating for the protection of all metal surfaces subject to erosive, corrosive, and severe fluid flow conditions. Product Characteristics Applications Two-coat system Easily applied by spray, brush, or roller Minimum thickness of 250 μm (10 mils) per coat Fans and housings Cooling water systems Base Plates Pump and valve assemblies Pipe coatings Technical Data Dry Temperature (Min/Max) -29˚C (-20˚F) to 80˚C (175˚F) Wet Temperature (Min/Max) -29˚C (-20˚F) to 52˚C (125˚F) Tensile Adhesion - kg/cm2 - MPa (psi) Greater than 140 - 14 (2000) Salt Fog >20000 hrs Available Sizes 1125 ml (cartridge), 1.5 l, 5 l, 16 l ARC S4+ 100% Solids, Mineral-Reinforced, Epoxy Novolac, Acid Resistant Coating An advanced, liquid polymer coating formulated to protect equipment from extreme chemical attack and corrosion. Product Characteristics Applications Two-coat system Easily applied by spray, brush, or roller Minimum thickness of 375 μm (15 mils) per coat Fans and housings Acid Transfer Pump Base Plates Reactor Agitators Technical Data Dry Temperature (Min/Max) -29˚C (-20˚F) to 150˚C (300˚F) Wet Temperature (Min/Max) -29˚C (-20˚F) to 60˚C (140˚F) Tensile Adhesion - kg/cm2 - MPa (psi) 330 kg/cm2 (32.4 MPa)4700 psi Salt Fog >10000 hrs Available Sizes 1125 ml (cartridge), 5 l, 16 l n Improves fluid flow efficiency n Extends equipment life n Sprayable viscosity for rapid installation n Spark testable for pinhole- free verification n Certified to WRAS (BS6920) drinking water standard n Provides long-term protection n Low permeability for immersion conditions n Sprayable viscosity for rapid installation n Spark testable for pinhole- free verification index Case History Case History
RotatingEquipmentSolutionsCAT
To see the actual publication please follow the link above